產品展示
CHENG ZHONG
成盅實業有限公司
PRODUCTS CENTER
CZ236 數控全自動PCB V-CUT切割機
功能說明:
10″全觸摸控制屏。
采用成盅全系列獨有之全自動投收板模式及快捷控制系統。
速度、效率全面提升，最快達36/分鐘X2刀。
跳刀功能精確高效。
自我保護功能全面升級。
Functionalinstruction:
10″touch control screen.
Adopt with Cheng Zhong particular automatic PCB board receiver and speed control system.
Speed and efficiently complete promoting,speed:36m/min x 2knife.
Knife function efficiently and accurately.
Self-protection function comprehensively upgraded.
產品精度規格表
Product Precise Specification Sheet
|
項目 (Item) |
規格 (Spec) |
項目 (Item) |
規格 (Spec) |
|
刀數 Several knives |
2刀 2knives |
深度最大誤差 The depth of maximum error |
±0.05mm |
|
最快速度 The fastest speed |
36m/分 36m/min |
定位最大誤差 Positioning the maximum error |
±0.05mm |
|
最大加工面積 Processing area of the largest |
480mm*480mm |
上下刀對位最大誤差 The biggest knife from top to bottom on the bit error |
±0.03mm |
|
最小加工面積 The minimum processing area |
60mm*60mm |
到板邊最小距離 Minimum distance between the plateadge |
2mm |
|
投收料形式 Expectedto vete in the form of land |
全自動 Full-automatic |
使用電力 The electrical power used |
AC220V、500W-900W |
|
送料形式 Form feed |
靠邊模式 keep to the side mode |
外型尺寸 Overall dimensions |
L1.15m*W1.1m*H1.8m |
|
加工板厚 Processes the board thick |
0.4mm-2.0mm |
使用氣壓 The use of pressure |
5.5~6kg/cm2 |
|
跳刀次數 Knife jumped munber |
單刀12次 12 times of single kinfe |
集塵流量要求 Dust flow requirements |
20~25m3/min |
成盅系列設備快捷操控面板特點：
